Command Reference WIDS Commands
Description
device aging duration
Use this command to configure device aging duration. Use the no form of this command to restore
the default aging duration.
device aging duration seconds
no device aging duration
Parameter
Description
Parameter Description
seconds
The parameter indicates device aging duration, ranging from 500 to
5000 seconds.
no
The parameter indicates that you restore the aging duration to the
default.
Defaults
The default aging duration is 1200 seconds.
Command
mode
WIDS configuration mode.
Usage Guide
N/A
Configuration
Examples
#Set the device aging duration to 1200s.
Ruijie(config)# wids
Ruijie(config-wids)# device aging duration 1200
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
device attack mac-address
Use this command to configure a static attack list for device countermeasures. Use the no form of this
command to delete a configured static attack address entry.
device attack mac-address H.H.H
no device attack mac-address H.H.H
Parameter
Description
Parameter Description