Command Reference NFPP Commands
Command
Mode
Interface configuration mode.
Usage Guide
N/A
Configuration
Examples
Ruijie(config)# interface G 0/1
Ruijie(config-if)# nfpp ip-guard scan-threshold 20
Related
Commands
Command Description
ip-guard attack-threshold
Set the global attack threshold.
show nfpp ip-guard summary
Show the configurations.
Platform
Description
N/A
nfpp nd-guard enable
Use this command to enable the ND anti-attack function on the interface.
nfpp nd-guard enable
Parameter
Description
Parameter Description
N/A N/A
Defaults
The ND anti-attack function is not enabled on the interface.
Command
Mode
Interface configuration mode.
Usage Guide
The interface ND anti-attack configuration is prior to the global configuration.
Configuration
Examples
Ruijie(config)# interface G0/1
Ruijie(config-if)# nfpp nd-guard enable
Related
Commands
Command Description
nd-guard enable
Enable the ND anti- attack function.
show nfpp nd-guard summary
Show the configurations.
Platform
Description
N/A