Command Reference NFPP Commands
Related
Commands
Command Description
log-buffer logs number_of_message interval
length_in_seconds
Show the rate of the syslog generated from the
NFPP buffer area.
show nfpp log
Show the NFPP log configuration or the log
buffer area.
Platform
Description
N/A
log-buffer logs
Use this command to set the rate of syslog generated from the NFPP log buffer area.
log-buffer logs number_of_message interval length_in_seconds
Parameter
Description
Parameter Description
number_of_message
The valid range is 0-1024.
0 indicates that all logs are recorded in the specific buffer area and no
syslogs are generated.
length_in_seconds
The valid range is 0-86400(one day).
0 indicates not to write the log to the buffer area but generate the
syslog immediately.
With both the number_of_message and length_in_seconds values
are 0, it indicates not to write the log to the buffer area but generate
the syslog immediately.
The parameter number_of_message /length_in_second indicates the
rate of syslog generated from the NFPP log buffer area.
Defaults
By default, the number_of_message is 1 and the length_in_seconds is 30.
Command
Mode
NFPP configuration mode.
Usage Guide
N/A
Configuration
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# log-buffer logs 2 interval 12
Related
Commands
Command Description
log-buffer entries number
Set the NFPP log buffer area size.
To Next Page
Loading...
