Ruijie RG-WLAN Series Rgos Command Reference

Command Reference IPv6 Commands
can specify the parameters. The following table shows the meanings of symbols returned by the ping
command:
Signs Meaning
! The response to each request sent is received.
. The response to the request sent is not received within a regulated time.
U The device has no route to the destination host.
R Parameter error.
F No system resource is available.
A The source IP address of the packet is not selected.
D The network interface is in the Down status, or the IPv6 function is disabled on the the
interface (for example, IP address collision is detected).
? Unknown error
Configuration
Examples
Ruijie# ping ipv6 fec0::1
Command Description Related
Commands
N/A N/A
Platform
Description
N/A
show ipv6 general-prefix
Use this command to show the information of the general prefix.
show ipv6 general-prefix
Parameter Description Parameter
Description
N/A N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
Use this command to show the information of the general prefix including the manually configured
and learned from the DHCPv6 agent.
Configuration
Examples
The following example shows the information of the general prefix
Ruijie# show ipv6 general-prefix
There is 1 general prefix.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English