EasyManuals Logo
Home>Ruijie>Wireless Access Point>RG-WLAN Series

Ruijie RG-WLAN Series Rgos Command Reference

Ruijie RG-WLAN Series
657 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #404 background imageLoading...
Page #404 background image
Command Reference 802.1X Commands
Supplicant Timeout: 10 sec
Server Timeout: 10 sec
Re-authen Max: 3 times
Maximum Request: 3 times
Filter Non-RG Supp: Disabled
Client Oline Probe: Disabled
Eapol Tag Enable: Disabled
Authorization Mode: Group Server
Related
Commands
Command Description
show dot1x Shows the information about 802.1x.
Platform
Description
N/A
dot1x re-authentication
Use this command to enable periodic re-authentication. Use the no form of the command to restore it
to the the default setting.
dot1x re-authentication
no dot1x re-authentication
Parameter
Description
Parameter Description
N/A N/A
Defaults
By default, it is not required to re-authenticate the supplicant periodically.
Command
Mode
Global configuration mode.
Usage Guide
This command will reauthenticate the supplicant periodically after he passes the authentication. Use
show dot1x command to show 802.1X configuration.
Configuration
Examples
The following example enables the re-authentication function:
Ruijie# configure terminal
Ruijie(config)# dot1x re-authentication
Ruijie(config)# end
Ruijie# show dot1x
802.1X Status: Enabled
Authentication mode: EAP-MD5

Table of Contents

Other manuals for Ruijie RG-WLAN Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ruijie RG-WLAN Series and is the answer not in the manual?

Ruijie RG-WLAN Series Specifications

General IconGeneral
BrandRuijie
ModelRG-WLAN Series
CategoryWireless Access Point
LanguageEnglish

Related product manuals