Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Syslog Commands
logging on
Use this command globally to allow logs to be displayed on different devices. Use the no form of this
command to disable the fucntion.
logging on
no logging on
Parameter
Description
Parameter Description
N/A N/A
Defaults
Logs are allowed to be displayed on different devices.
Command
Mode
Global configuration mode
Usage Guide
Log information can not only be shown in the Console window and VTY window, but also be recorded
in different equipments such as the memory buffer, the extended FLASH and Syslog Server. This
command is the total log switch. If this switch is turned off, no log will be displayed or recorded unless
the severity level is greater than 1.
Configuration
Examples
The following example disables the log switch on the device.
Ruijie(config)# no logging on
Related
Commands
Command Description
logging buffered
Records the logs to a memory buffer.
logging
Sends logs to the Syslog server.
logging file flash:
Records logs on the extended FLASH.
logging console
Allows the log level to be displayed on the
console.
logging monitor
Allows the log level to be displayed on the VTY
window (such as telnet window) .
logging trap
Sets the log level to be sent to the Syslog
server.
Platform
Description
N/A
logging rate-limit
Use this command to enable log rate limit function to limit the output logs in a second in the global

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English