Command Reference MAC Address Commands
show mac-address-table vlan
Show all types of MAC addresses of the specified VLAN
show mac-address-table count
Show the address counts in the MAC address table.
show mac-address-table static
Show the static MAC address.
show mac-address-table filtering
Show the filtering MAC address.
Platform
Description
N/A
show mac-address-table aging-time
Use this command to display the aging time of the dynamic MAC address.
show mac-address-table aging-time
Parameter Description Parameter
Description
N/A N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
Configuration
Examples
Ruijie# show mac-address-table aging-time
Aging time : 300
Command Description Related
Commands
mac-address-table aging-time
Specify the aging time of the dynamic MAC address.
Platform
Description
N/A
show mac-address-table count
This command is used to display the number of address entries in the address table.
show mac-address-table count [interface interface-id | vlan vlan-id]
Parameter Description Parameter
Description
N/A N/A
Defaults
N/A
Command
Privileged EXEC mode.