Command Reference DNS Module Commands
DNS Module Commands
ip domain-lookup
Use this command to enable the DNS to carry out the domain name resolution. Use the no form of
this command to disable the DNS domain name resolution function.
ip domain-lookup
no ip domain-lookup
Parameter
Description
Parameter Description
N/A N/A
Defaults
Enabled
Command
Mode
Global configuration mode.
Usage Guide
This command enables the domain name resolution function.
Configuration
Examples
The following example enables the DNS domain name resolution function.
Ruijie(config)# ip domain-lookup
Related
Commands
Command Description
show hosts
Shows the DNS related configuration
information.
Platform
Description
N/A
ip name-server
Use this command to configure the IP address of the domain name server. Use the no form of this
command to delete the configured domain name server.
ip name-server { ip-address | ipv6-address }
no ip name-server [ ip-address | ipv6-address ]
Parameter
Description
Parameter Description
ip-address
The IP address of the domain name server.