Command Reference RADIUS Commands
radius set qos cos
no radius set qos cos
Parameter Description Parameter
Description
N/A N/A
Defaults
The qos value sent by the RADIUS server is set to the dscp value by default.
Command
Mode
Global configuration mode
Usage Guide
Use this command to set the qos value sent by the RADIUS server to the cos value. The qos
value sent by the RADIUS server is set to the dscp value by default.
Configuration
Examples
The following example sets the qos value sent by the RADIUS server to the cos value of an
interface.
Ruijie(config)# radius set qos cos
Command Description Related
Commands
radius vendor-specific extend
RADIUS is extended not to differentiate the IDs of
private vendors.
Platform
Description
N/A
radius vendor-specific extend
Use this command to extend RADIUS not to differentiate the IDs of private vendors.radius
vendor-specific extend
no radius vendor-specific extend
Parameter Description Parameter
Description
N/A N/A
Defaults
Only the private vendor IDs of Ruijie are recognized by default.
Command
Mode
Global configuration mode
Usage Guide
Use this command to identify the attributes of all vendor IDs by type.
Configuration
The following example extends RADIUS not to differentiate the IDs of private vendors.