Ruijie RG-WLAN Series

Command Reference UDP-Helper Module Commands
Description
udp-helper enable
Use this command to enable relay forwarding for the UDP broadcast packet. Use the no form of this
command to disable this function.
udp-helper enable
no udp-helper enable
Parameter
Description
Parameter Description
N/A N/A
Defaults
The relay and forwarding of the UDP broadcast packet is disabled by default.
Command
Mode
Global configuration mode
Usage Guide
Enable the forwarding function of UDP-Helper. The UDP broadcast packets from the port 69, 53, 37,
137, 138, and 49 are relayed and forwarded by default.
Configuration
Examples
#Enable the UDP forwarding function.
Ruijie(config)# udp-helper enable
Related
Commands
Command Description
ip forward-protocol
Enables the forwarding function on the UDP
port.
Platform
Description
N/A