Ruijie RG-WLAN Series

Command Reference ACL Commands
Ruijie(config)#ipv6 access-list extended v6-acl
Ruijie(config-ipv6-nacl)#11 permit ipv6 host ::192.168.4.12 any
Ruijie(config-ipv6-nacl)# show access-lists
ipv6 access-list extended v6-acl
11 permit ipv6 host ::192.168.4.12 any
Ruijie(config-ipv6-nacl)# exit
Ruijie(config)#interface gigabitethernet 1/1
Ruijie(config-if)#ipv6 traffic-filter v6-acl in
Related
Commands
Command Description
show access-lists
Show all the ACLs.
ipv6 traffic-filter
Apply the extended ipv6 ACL on the interface.
ip access-group
Apply the IP ACL on the interface.
mac access-group
Apply the extended MAC ACL on the interface.
ip access-list
Define the IP ACL.
mac access-list
Define the extended MAC ACL.
expert access-list
Define the extended expert ACL.
ipv6 access-list
Define the extended IPv6 ACL.
deny
Deny the access.
Platform
Description
N/A
security access-group
Use this command to configure the secure interface channel.
security access-group {id|name}
no security access-group
Parameter
Description
Parameter Description
id
It indicates the ID of the ACL.
name
It indicates the name of the ACL.
Defaults
N/A
Command
mode
Interface configuration mode
Usage Guide
This command is used to configure the secure interface channel.
Configuration
Ruijie(config-if)#security access-group 1