Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Wireless Security Commands
Ruijie (config)#wlansec 1
Ruijie(wlansec)# security rsn ciphers tkip enable
The following example disables the TKIP encryption method for WLAN1 in the RSN authentication
mode.
Ruijie (config)#wlansec 1
Ruijie(wlansec)# security rsn ciphers tkip disable
Related
Commands
Command Description
security rsn { enable | disable }
Configures the RSN authentication mode.
security rsn akm { psk | 802.1x } { enable |
disable }
Configures an authentication method in the
RSN authentication mode.
security rsn akm psk set-key ascci
Configures a shared password for RSNs.
Platform
Description
N/A
security static-wep-key authentication
The command is used to configure an authentication method for a WLAN in the static WEP mode.
This command has no no prefix, and any configuration prefixed with no does not work at all. The
command format is:
security static-wep-key authentication { open | share-key }
Parameter
Description
Parameter Description
open
Indicates the open system authentication mode.
share-key
Indicates the shared key configuration mode.
Defaults The default setting is open.
Command
mode
WLAN security configuration mode.
Usage Guide This command must be used with the security static-wep-key encryption command. Usually, the
static WEP key must be configured before the shared key authentication method can be configured.
In any security mode other than the static WEP security mode, it is of no use to configure the link
authentication mode.
Configuration
Examples
The following example configures the authentication mode of WLAN1 to open system authentication.
Ruijie (config)#wlansec 1
Ruijie(wlansec)# security static-wep-key authentication open
The following example configures the authentication mode of WLAN1 to shared key authentication.
Ruijie (config)#wlansec 1

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English