Command Reference ACL Commands
show ip access-group
Use this command to show the configured expert ACL of the interface.
show ip access-group[ interface interface ]
Parameter
Description
Parameter Description
interface
Interface ID
Defaults
N/A
Command
mode
Privileged EXEC mode
Usage Guide
Show the IP ACL configured of the interface. If no interface is specified, the associated IP ACLs of all
the interfaces will be shown.
Configuration
Examples
Ruijie# show ip access-group interface gigabitethernet 0/1
ip access-group aaa in
Applied On interface GigabitEthernet 0/1.
Related
Commands
Command Description
ip access-list
Define the IP ACL.
Platform
Description
N/A
show mac access-group
Use this command to show the configured MAC ACL of the interface.
show mac access-group[ interface interface ]
Parameter
Description
Parameter Description
interface
Interface ID
Defaults
N/A
Command
mode
Privileged EXEC mode
Usage Guide
Show the MAC ACL associated with the interface. If no interface is specified, the associated MAC