Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Syslog Commands
logging count
Use this command to enable the log statistics function in global configuration mode. Use the no form
of the command to delete the log statistics and disable the statistics function.
logging count
no logging count
Parameter
Description
Parameter Description
N/A N/A
Defaults
The log statistics function is disabled by default.
Command
Mode
Global configuration mode
Usage Guide
This command enables the log statistics function. The statistics begins when the function is enabled.
If you run the no logging count command, the statistics function is disabled and the statistics data is
deleted.
Configuration
Examples
The following example enables the log statistics function:
Ruijie(config)# logging count
Related
Commands
Command Description
show logging count
Views log information about modules of the
system.
show logging
Views basic configuration of log modules and
log information in the buffer.
Platform
Description
N/A
logging facility
Use this command to configure the device value of the log information in global configuration mode.
Use the no form of the command to restore it to the default device value (23).
logging facility facility-type
no logging facility
Parameter
Description
Parameter Description
facility-type
Syslog device value. For specific settings, refer to the usage guide.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English