Ruijie RG-WLAN Series Rgos Command Reference

Command Reference IPv6 Commands
Examples
Command Description Related
Commands
show ipv6 interface
Show the interface information.
Platform
Description
N/A
ipv6 nd suppress-ra
Use this command to disable the interface from sending the RA message. Use the no form of this
command to enable the function.
ipv6 nd suppress-ra
no ipv6 nd suppress-ra
Parameter Description Parameter
Description
N/A N/A
Defaults
The RA message is not sent on the IPv6 interface by default.
Command
Mode
Interface configuration mode.
Usage Guide
This command suppresses the sending of the RA message on an interface.
Configuration
Examples
Ruijie(config-if)# ipv6 nd suppress-ra
Command Description Related
Commands
show ipv6 interface
Show the interface information.
Platform
Description
N/A
ipv6 neighbor
Use this command to configure a static neighbor. Use the no form of this command to remove the
setting.
ipv6 neighbor ipv6-address interface-id hardware-address
no ipv6 neighbor ipv6-address interface-id
Parameter Description Parameter
Description
ipv6-address
IPv6 address of the neighbor. It must follow the address format defined

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English