Command Reference WIDS Commands
whitelist mac-address H.H.H
no whitelist mac-address H.H.H
Parameter
Description
Parameter Description
H.H.H
The parameter indicates that you set the device with the source MAC
address H.H.H as a whitelist entry.
no
The parameter indicates that you delete the whitelist.
Defaults The default is null.
Command
mode
WIDS configuration mode.
Usage Guide
N/A
Configuration
Examples
#Configure the device with the source MAC address 0000.0000.0001 to the whitelist.
Ruijie(config)# wids
Ruijie(config-wids)# whitelist mac-address 0000.0000.0001
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
whitelist max
Use this command to configure the maximum number of whitelists.
Use the no form of this command to restore the default setting.
whitelist max number
no whitelist max
Parameter
Description
Parameter Description
number
Specifies the maximum number of whitelists.
Value range: 1 to 1024
no
Restores the maximum number of whitelists to 512.
Defaults
The maximum number of whitelists is 512 by default.
Command
mode
WIDS configuration mode