Ruijie RG-WLAN Series Rgos Command Reference

Command Reference DHCP Snooping Commands
ip dhcp snooping
Use this command to enable the DHCP snooping function globally. The no form of this command will
disable the DHCP snooping function globally.
ip dhcp snooping
no ip dhcp snooping
Parameter
Description
Parameter Description
N/A. N/A.
Defaults
Disabled
Command
Mode
Global configuration mode
Usage Guide Enable the DHCP snooping function on the switch. You can use the show ip dhcp snooping
command to view whether the DHCP snooping function is enabled.
DHCP Snooping cannot coexist with private VLAN.
Configuration
Examples
The following is an example of enabling the DHCP snooping function.
Ruijie# configure terminal
Ruijie(config)# ip dhcp snooping
Ruijie(config)# end
Ruijie# show ip dhcp snooping
Switch DHCP snooping status: ENABLE
DHCP snooping Verification of hwaddr field status: DISABLE
DHCP snooping database write-delay time: 0 seconds
DHCP snooping option 82 status: ENABLE
DHCP Snooping Support Bootp bind status: ENABLE
Interface Trusted Rate limit (pps)
------------------------ ------- ---------------
Related
Commands
Command Description
show ip dhcp snooping
View the configuration information of DHCP
snooping.
Platform
Description
N/A.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English