Ruijie RG-WLAN Series Rgos Command Reference

Command Reference 802.1X Commands
show dot1x Shows the information about 802.1x.
Platform
Description
N/A
dot1x timeout supp-timeout
Use this command to set the authentication timeout between the device and the supplicant. Use the
no form of the command to restore it to the default setting.
dot1x timeout supp-timeout seconds
no dot1x timeout supp-timeout
Parameter
Description
Parameter Description
seconds
Authentication timeout between the device and the supplicant The
range is from 0 to 65535 seconds.
Defaults
3 seconds.
Command
Mode
Global configuration mode.
Usage Guide
Use the show dot1x command to show 802.1X configuration.
Configuration
Examples
The following example sets the authentication timeout between the device and
the supplicant to 10s:
Ruijie# configure terminal
Ruijie(config)# dot1x timeout supp-timeout 10
Ruijie(config)# end
Ruijie# show dot1x
802.1X Status: Enabled
Authentication Mode: EAP-MD5
Authed User Number: 0
Re-authen Enabled: Disabled
Re-authen Period: 1000 sec
Quiet Timer Period: 1000 sec
Tx Timer Period: 3 sec
Supplicant Timeout: 10 sec
Server Timeout: 10 sec
Re-authen Max: 3 times
Maximum Request: 3 times
Filter Non-RG Supp: Disabled

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English