Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Web Authentication Commands
users’ on-line time.
web-auth accounting jitter-off
no web-auth accounting jitter-off
Parameter
Description
Parameter Description
N/A N/A
Defaults
By default, the checking time will not be counted in the users’ on-line time.
Command
mode
Global configuration mode.
Usage Guide
1. This function is only for counting time.
2. The default configuration is recommended.
3. Please refer to Wireless Security Configuration for the details of this function.
Configuration
Examples
# Include the checking time in the on-line time.
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# web-auth accounting jitter-off
Related
Commands
Command Description
webauth prevent-jitter
Configures WEB authentication jitter-off time.
web-auth offline-detect flow
Enables the traffic detection.
Platform
Description
This command is supported only on wireless products.
web-auth authen-mode
Use this command to configure controlled mode for web authentication. IPv4 controlled is configured
by default, which means the device only intercept IPv4 packets and deliver IPv6 packets by default.
Use the no or default form of this command to restore the default configuration.
web-auth authen-mode { ipv4 | ipv6 | both }
no web-auth authen-mode
Parameter
Description
Parameter Description
ipv4
Configures the web authentication as IPv4 controlled.
ipv6
Configures the web authentication as IPv6 controlled.
both
Configures the web authentication as both IPv4 and IPv6 controlled.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English