Ruijie RG-WLAN Series Rgos Command Reference

Command Reference SNMP Commands
Command
mode
Global configuration mode
Usage Guide
The SNMP system serial number is generally the serial number of the machine to facilitate the device
identification. The serial number can be viewed by the show snmp command.
Configuration
Examples
The following example specifies the SNMP system serial number as 123456:
Ruijie(config)# snmp-server chassis-id 123456
Related
Commands
Command Description
show snmp
Shows the SNMP statistics.
Platform
Description
N/A
snmp-server community
Use this command to specify the SNMP community access string in global configuration mode. Use
the no form of this command to cancel the specified SNMP community access string.
snmp-server community string [ view view-name ] [ [ ro | rw ] [ host ipaddr ] [ ipv6 ipv6-aclname ]
[ aclnum ] [ aclname ]
no snmp-server community string
Parameter
Description
Parameter Description
string
Community string, which is equivalent to the communication
password between the NMS and the SNMP agent
view-name
Name of the view used for view-based management
ro
Indicates that the NMS can only read the variables of the MIB.
rw
Indicates that the NMS can read and write the variables of the MIB.
aclnum
Serial number of the ACL, which is associated with a specified
access list, specifies the IPV4 address range of the NMS that are
permitted to access the MIB.
aclname
Name of the ACL, which is associated with a specified access list,
specifies the IPV4 address range of the NMS that are permitted to
access the MIB.
ipv6-aclname
Name of the IPv6 ACL, which is associated with a specified access
list, specifies the IPv6 address range of the NMS that are permitted to
access the MIB
ipaddr
Specifies IP address of the NMS accessing the MIB, which is
associated with NMS addresses.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English