Command Reference 802.1X Commands
Authed User Number: 0
Re-authen Enabled: Disabled
Re-authen Period: 3600 sec
Quiet Timer Period: 10 sec
Tx Timer Period: 3 sec
Supplicant Timeout: 3 sec
Server Timeout: 5 sec
Re-authen Max: 3 times
Maximum Request: 3 times
Filter Non-RG Supp: Disabled
Client Oline Probe: Disabled
Eapol Tag Enable: Disabled
Authorization Mode: Group Server
Ruijie#
Related
Commands
Command Description
dot1x auth-mode
Sets the 802.1x authentication mode.
dot1x max-req
Sets the maximum number of authentication
request retransmissions.
dot1x port-control auto
Sets the port to participate in authentication.
dot1x reauth-max
Sets the maximum number of the supplicant
re-authentications.
dot1x re-authentication
Sets the re-authentication attribute.
dot1x timeout quiet-period
Sets the time the device waits before
reauthentication.
dot1x timeout re-authperiod
Sets the re-authentication period for the
supplicant.
dot1x timeout server-timeout
Sets the authentication timeout between the
device and authentication server.
dot1x timeout supp-timeout
Sets the authentication timeout between the
device and the supplicant.
dot1x timeout tx-period
Sets the retransmission period.
Platform
Description
N/A
show dot1x auto-req
Use this command to show the configuration information of automatic 802.1x authentication.
show dot1x auto-req