Ruijie RG-WLAN Series Rgos Command Reference

Command Reference IPv6 Commands
Defaults
Disabled.
Command
Mode
Interface configuration mode.
Usage Guide The IPv6 function of an interface can be enabled by configuring ipv6 enable or by configuring IPv6
address for the interface.
If an IPv6 address is configured for the interface, the IPv6 function will be enabled
automatically on the interface and cannot be disabled with no ipv6 enable.
Configuration
Examples
Ruijie(config-if)# ipv6 enable
Command Description Related
Commands
show ipv6 interface
Show the related information of an interface.
Platform
Description
N/A
ipv6 general-prefix
Use this command to configure the IPv6 general prefix in the global configuration mode.
ipv6 general-prefix prefix-name ipv6-prefix/prefix-length
no ipv6 general-prefix prefix-name ipv6-prefix/prefix-length
Parameter Description
prefix-name
The general prefix name.
pv6-prefix
The network prefix value of the general-prefix following the
format defined in RFC4291.
Parameter
Description
prefix-length
The length of the general prefix.
Defaults
N/A
Command
Mode
Global configuration mode.
Usage Guide
It is convenient to number the network by using the general prefix, which defines a prefix so that many
longer specified prefixes could refer to it. These specified prefixes are updated whenever the general
prefix changes. If the network number changes, just modify the general prefix.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English