Command Reference Dot11 Radio Commands
11gsupport enable
Use this command to enable the specified radio to support 802.11g, or 802.11b/g on 2.5 GHz.
11gsupport enable
no 11gsupport enable
Parameter
Description
Parameter Description
no
Disables the radio to support 802.11g.
Defaults
By default, the 802.11g is supported.
Command
mode
Dot11radio interface configuration mode
Usage Guide
N/A
Configuration
Examples
# Disable the radio to support 802.11g.
Ruijie(config)#interface dot11radio 1/0
Ruijie(config-if-Dot11radio 1/0)# no 11gsupport enable
Ruijie(config)#interface vfc 2
Ruijie(config-interface-vfc)#bind mac-address 001d.0928.b62f
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
11nsupport enable
Use this command to enable the specified radio to support 802.11n.
11nsupport enable
no 11nsupport enable
Parameter
Description
Parameter Description
no
Disables the radio to support 802.11n.
Defaults
By default, the 802.11n is supported.
Command
Dot11radio interface configuration mode