Ruijie RG-WLAN Series Rgos Command Reference

Command Reference MAC Address Commands
show mac-address-table address
This command is used to display all address information
about the specified address.
show mac-address-table interface
This command is used to display all address information
about the specified interface.
show mac-address-table count
This command is used to display the number of addresses
in the address table.
Platform
Description
-
snmp trap mac-notification
Use this command to enable the MAC address trap notification on the specified interface. You can
use The no form of the command to disable this function.
snmp trap mac-notification { added | removed }
no snmp trap mac-notification { added | removed }
Parameter Description
added
Notify when a MAC address is added.
Parameter
Description
removed
Notify when a MAC address is removed
Defaults
Disabled.
Command
Mode
Interface configuration mode.
Usage Guide Use show mac-address-table notification interface to display configuration.
Configuration
Examples
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# snmp trap mac-notification added
Command Description
mac-address-table notification
Enable MAC address notification.
Related
Commands
show mac-address-table
notification
Show the MAC address notification configuration and the MAC
address notification table.
Platform
Description
N/A

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English