Command Reference RADIUS Dynamic Authorization Extension Commands
radius dynamic-authorization-extension duplicate-packet discard
Use this command to discard duplicated packets about RADIUS dynamic authorization extension.
Use the no form of this command to disable the function.
radius dynamic-authorization-extension duplicate-packet discard
no radius dynamic-authorization-extension duplicate-packet discard
Parameter
Description
Parameter Description
N/A N/A
Defaults
Duplicated packets about RADIUS dynamic authorization extension are not discarded.
Command
mode
Global configuration mode
Usage Guide
N/A
Configuration
Examples
#Discard duplicated packets about RADIUS dynamic authorization extension:
Ruijie(config)# radius dynamic-authorization-extension duplicate-packet
discard
Related
Commands
Command Description
show running-config
Shows the configuration.
Platform
Description
N/A
radius dynamic-authorization-extension max-request
Use this command to set the number of RADIUS Disconnect-Request packets that can be processed
concurrently. Use the no form of this command to remove the setting.
radius dynamic-authorization-extension max-request num
no radius dynamic-authorization-extension max-request
Parameter
Description
Parameter Description
num
Specifies the number of RADIUS Disconnect-Request packets that
can be processed concurrently. This value ranges from 0 to 1000. 0
indicates that the number of concurrently processed RADIUS
Disconnect-Request packets is not limited. The default value is 100.