Command Reference AAA Commands
Platform
Description
N/A
state
Use this command to set whether the configured domain is valid.
Use the no form of this command to restore to the default setting.
state { block | active }
no state
Parameter Description
block
The configured domain is invalid.
Parameter
Description
active
The configured domain is valid.
Defaults
The configured domain is valid by default.
Command
Mode
Domain configuration mode
Usage Guide
Use this command to set whether the specified configured domain is valid.
Configuration
Examples
The following example sets the configured domain to be invalid.
Ruijie(config)# aaa domain ruijie.com
Ruijie(config-aaa-domain)# state block
Command Description
aaa new-model
Enables the AAA security service.
aaa domain enable
Enables the domain name-based AAA service.
Related
Commands
show aaa domain enable
Displays domain configuration .
Platform
Description
N/A
show aaa domain
Use this command to query all current domain information
show aaa domain [ default | domain-name ]
Parameter Description
default
Displays the default domain information.
Parameter
Description
domain-name
Displays information about the specified domain.
Defaults
N/A