Ruijie RG-WLAN Series

Command Reference 802.1X Commands
802.1X Commands
dot1x auto-req
Use this command to configure 802.1X active authentication function in the global configuration
command. The no form of this command disables the automatic authentication function.
dot1x auto-req
no dot1x auto-req
Parameter
Description
Parameter Description
N/A N/A
Defaults
Enabled
Command
Mode
Global configuration mode.
Usage Guide This command is used to actively initiate 802.1x authentication on the device. Use the show dot1x
auto-req command to view the setting of this function.
Configuration
Examples
The following example sets the device to automatically initiate 802.1x authentication:
Ruijie# configure terminal
Ruijie(config)# dot1x auto-req
Ruijie(config)# end
Ruijie(config)# show dot1x auto-req
Auto-Req: Enabled
User-Detect : Enabled
Packet-Num : 0
Req-Interval: 30 Second
Related
Commands
Command Description
show dot1x auto-req
Shows the automatic authentication request
information.
Platform
Description
N/A