Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Wireless Security Commands
Platform
Description
N/A
security rsn akm
The command is used to configure an authentication method for a WLAN in the RSN authentication
mode. This command has no no prefix, and any configuration prefixed with no does not work at all.
The command format is:
security rsn akm { psk | 802.1x } { enable | disable }
Parameter
Description
Parameter Description
psk
Indicates to configure the authentication method to pre-shared key
identity verification.
802.1x
Indicates to configure the authentication method to IEEE802.1x
authentication.
enable
Indicates that you enable an authentication method in the RSN
authentication mode.
disable
Indicates to disable an authentication method in the RSN
authentication mode.
Defaults
N/A
Command
mode
WLAN security configuration mode.
Usage Guide
The command is used to enable an authentication method in the RSN authentication mode. Only
after the RSN authentication mode is enabled can an authentication method be configured. There are
two authentication methods: PSK and 802.1x.
Configuration
Examples
The following example configures the authentication method for WLAN1 in the RSN authentication
mode to PSK.
Ruijie (config)#wlansec 1
Ruijie(wlansec)# security rsn akm psk enable
The following example disables the PSK authentication for WLAN1 in the RSN authentication mode.
Ruijie (config)#wlansec 1
Ruijie(wlansec)# security rsn akm psk disable
The following example configures the authentication method for WLAN1 in the RSN authentication
mode to 802.1x authentication.
Ruijie (config)#wlansec 1
Ruijie(wlansec)# security rsn akm 802.1x enable
The following example disables the 802.1x authentication for WLAN1 in the RSN authentication
mode.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English