Ruijie RG-WLAN Series Rgos Command Reference

Command Reference WLAN Capture Commands
service enable
Use this command to enable the WLAN capture service. Use the no form of this command to disable
the WLAN capture service.
service enable
no service enable
Parameter
Description
Parameter Description
N/A N/A
Defaults
Disabled
Command
mode
After the WLAN capture service is enabled can the remote device connect and control the fat AP.
Usage Guide
Only when the WLAN capture service is enabled, can the remote host access and control the fat AP.
After you enable the WLAN capture, all configurations in this mode are unmodifiable.
Configuration
Examples
Example 1: enable the WLAN capture service.
Ruijie# configure terminal
Ruijie(config)#wlan-cap
Ruijie(wlan-cap)#service enable
Ruijie(wlan-cap)#exit
Related
Commands
Command Description
show wlan-cap config
Shows the WLAN capture configuration.
Platform
Description
This command is supported only on the fat AP.
forward
Use this command to configure the forwarding mode of WLAN capture packets.
forward { central | local }
Parameter
Description
Parameter Description
central
Centralized forwarding mode. Packets of the WLAN capture from AP

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English