Command Reference WIDS Commands
Usage Guide
N/A
Configuration
Examples
#Set the device countermeasure mode to rogue.
Ruijie(config)# wids
Ruijie(config-wids)# countermeasure mode rogue
Related
Commands
Command Description
N/A N/A
Platform
Description
This command is supported on ACs and fat APs.
countermeasures rssi-min
Use this command to configure the lower limit of the signal for the countermeasures.
Use the no form of this command to restore the default setting.
countermeasures rssi-min number
no countermeasures rssi-min
Parameter
Description
Parameter Description
number
Specifies the lower limit of the signal strength for the
countermeasures.
Value range: 0 to 75
no
Restores the lower limit of the signal strength for the
countermeasures to 25.
Defaults
The lower limit of the signal strength for the countermeasures is 25 by default.
Command
mode
WIDS configuration mode
Usage Guide
N/A
Configuration
Examples
#Set the lower limit of the signal strength for the countermeasures to 0.
Ruijie(config)# wids
Ruijie(config-wids)# countermeasures rssi-min 0
Related
Commands
Command Description
N/A N/A
Platform
N/A