Ruijie RG-WLAN Series

Command Reference MAC Address Commands
Defaults
The MAC address notification configuration is shown by default.
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
Ruijie# show mac-address-table notification interface
Interface MAC Added Trap MAC Removed Trap
--------- -------------- --------------
GigabitEthernet1/14 Disabled Disabled
Ruijie# show mac-address-table notification
MAC Notification Feature: Disabled
Interval between Notification Traps: 1 secs
Maximum Number of entries configured in History Table:1
Current History Table Length: 0
Ruijie# show mac-address-table notification history
History Index: 0
MAC Changed Message:
Operation:ADD Vlan: 1 MAC Addr: 00f8.d012.3456 GigabitEthernet 3/1
Command Description
mac-address-table notification
Enable MAC address notification.
Related
Commands
snmp trap mac-notification
Enable the MAC address trap notification function on the
specified interface.
Platform
Description
N/A
show mac-address-table static
Use this command to show the static MAC address.
show mac-address-table static [addr mac-add r] [ interface interface-Id ] [ vlan vlan-id ]
Parameter Description
mac-addr
Destination MAC address of the entry
vlan-id
VLAN ID of the entry
Parameter
Description
interface-id
Interface of the entry physical interface or aggregate port
Defaults
N/A
Command
Mode
Privileged EXEC mode.