Ruijie RG-WLAN Series Rgos Command Reference

Command Reference WLAN Capture Commands
are centralized by AC, and then will be forwarded to the remote
device.
local
Local forwarding mode. Packets of the WLAN capture are forwarded
by AP directly to the remote device.
Defaults
Centralized forwarding mode.
Command
mode
WLAN capture configuration mode
Usage Guide This command does not have the no form.
The forwarding mode must be configured before the WLAN capture service is
configured.
Configuration
Examples
Example 1: Configure the local forwarding mode for the AP.
Ruijie# configure terminal
Ruijie(config)#wlan-cap
Ruijie(wlan-cap)#forward local
Ruijie(wlan-cap)#exit
Related
Commands
Command Description
service enable
Enables the WLAN capture.
show wlan-cap config
Shows the WLAN capture configuration.
Platform
Description
This command is supported only on the AC.
rpcap port
Use this command to configure a TCP port to be a Wireless Sniffer. Use the no form of this command
to restore the default settings.
rpcap port port-value
no rpcap port
Parameter
Description
Parameter Description
port-value
Monitoring port number, ranging from 1 to 65535.
Defaults
The default value is 2002

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English