Ruijie RG-WLAN Series

Command Reference 802.1X Commands
Configuration
Examples
This example shows how to configure the 802.1X authentication mode:
Ruijie# configure terminal
Ruijie(config)# dot1x auth-mode chap
Ruijie(config)# end
Ruijie#
Related
Commands
Command Description
show dot1x Shows the information about 802.1x.
Platform
Description
N/A
dot1x default
Use this command to restore part of 802.1x parameters to the default value.
dot1x default }
Parameter
Description
Parameter Description
N/A N/A
Defaults
N/A
Command
Mode
Global configuration mode.
Usage Guide
Use the show dot1x command to show the 802.1X configurations.
Configuration
Examples
The following example sets the default parameters of 802.1x:
Ruijie# configure terminal
Ruijie(config)# dot1x default
Ruijie(config)# end
Ruijie# end
Related
Commands
Command Description
show dot1x Shows the information about 802.1x.
Platform
N/A