Command Reference DHCPv6 Relay Agent Commands
clear ipv6 dhcp relay statistics
Use this command to clear the statistics on transmitted packets after DHCPv6 Relay is enabled on a
device.
clear ipv6 dhcp relay statistics
Parameter
Description
Parameter Description
N/A N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode
Usage Guide
You can use this command to clear the statistics on transmitted packets after DHCPv6 Relay is
enabled on the device.
Configuration
Examples
The following example clears the statistics on DHCPv6 Relay Agent packets (all packets counts
become 0 after this command is executed).
Ruijie#clear ipv6 dhcp relay statistics
Related
Commands
Command Description
show ipv6 dhcp relay statistics
Displays the statistics on DHCPv6 Relay
packets.
Platform
Description
N/A