EasyManuals Logo

Ruijie RG-WLAN Series Rgos Command Reference

Ruijie RG-WLAN Series
657 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #300 background imageLoading...
Page #300 background image
Command Reference SNTP Commands
SNTP Commands
sntp enable
Use this command to enable the Simple Network Time Protocol (SNTP). Use the no form of this
command to restore the default value Disable.
sntp enable
no sntp enable
Parameter
Description
Parameter Description
N/A N/A
Defaults
SNTP is disabled by default.
Command
Mode
Global configuration mode
Usage Guide
This command shows SNTP parameters.
Configuration
Examples
Ruijie(config)# sntp enable
Related
Commands
Command Description
show sntp
Shows the SNTP configuration.
clock update-calendar
Synchronizes the software clock with the
hardware clock.
clock set
Sets the software clock.
Platform
Description
N/A
sntp interval
Use this command to set the interval for the SNTP Client to synchronize its clock with the NTP/SNTP
Server.
sntp interva seconds
no sntp interval
Parameter Parameter Description

Table of Contents

Other manuals for Ruijie RG-WLAN Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ruijie RG-WLAN Series and is the answer not in the manual?

Ruijie RG-WLAN Series Specifications

General IconGeneral
BrandRuijie
ModelRG-WLAN Series
CategoryWireless Access Point
LanguageEnglish

Related product manuals