Ruijie RG-WLAN Series Rgos Command Reference

Command Reference SNMP Commands
packet.
Platform
Description
N/A
snmp-server system-shutdown
Use this command to enable the SNMP system restart notification function in global configuration
mode. Use the no form of this command to disable the SNMP system notification function.
snmp-server system-shutdown
no snmp-server system-shutdown
Parameter
Description
Parameter Description
N/A N/A
Defaults
The SNMP system restart notification function disabled by default.
Command
mode
Global configuration mode
Usage Guide
This command is used to enable the SNMP system restart notification function. The RGOS sends the
SNMP trap messages to the NMS to notify the system restart before the device is reloaded or
rebooted.
Configuration
Examples
The following example enables the SNMP system restart notification function:
Ruijie(config)# snmp-server system-shutdown
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
snmp-server trap-source
Use this command to specify the source address of the SNMP trap message in global configuration
mode. Use the no form of this command to restore it to the default value.
snmp-server trap-source interface
no snmp-server trap-source
Parameter Parameter Description

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English