Ruijie RG-WLAN Series Rgos Command Reference

Command Reference NTP Commands
NTP Commands
no ntp
Use this command to disable the ntp synchronization service with the time server and clear all
configuration information of ntp.
no ntp
Parameter
Description
Parameter Description
N/A N/A
Defaults
The NTP service is disabled by default.
Command
Mode
Global configuration mode
Usage Guide
By default, the NTP service is disabled. However, the NTP service will be enabled once the NTP
server or the NTP security identification mechanism is configured.
Configuration
Examples
The following example disables the NTP service.
Ruijie(config)# no ntp
Related
Commands
Command Description
ntp server
Specifies the NTP server.
Platform
Description
N/A
ntp access-group
Use this command to configure the access control priority of the NTP service. Use the no form of this
command to cancel the access control priority.
ntp access-group { peer | serve | serve-only | query-only } access-list-number | access-list-name
no ntp access-group { peer | serve | serve-only | query-only } access-list-number |
access-list-name
Parameter
Description
Parameter Description
peer
Allows the time request for, control and query for the local NTP

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English