Ruijie RG-WLAN Series

Command Reference NFPP Commands
100 20 120
The following example shows the monitored host:
Ruijie# show nfpp dhcpv6-guard hosts
If column 1 shows '*', it means "hardware failed to isolate host".
VLAN interface MAC address remain-time(seconds)
---- --------- ----------- -------------------
1 gi0/2 0000.0000.0001 10
*2 gi0/1 0000.0000.0002 20
Total:2 host(s)
Related
Commands
Command Description
clear nfpp dhcpv6-guard hosts
Clear the monitored host.
Platform
Description
N/A
show nfpp dhcpv6-guard summary
Use this command to show the configurations.
show nfpp dhcpv6-guard summary
Parameter
Description
Parameter Description
N/A N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
Ruijie# show nfpp dhcpv6-guard summary
(Format of column Rate-limit and Attack-threshold is
per-src-ip/per-src-mac/per-port.)
Interface Status Isolate-period Rate-limit Attack-threshold
Global Enable 300 -/5/150 -/10/300
Gi 0/1 Enable 180 -/6/- -/8/-
Gi 0/2 Disable 200 -/5/30 -/10/50
Maximum count of monitored hosts: 1000
Monitor period:300s