Ruijie RG-WLAN Series Rgos Command Reference

Command Reference RADIUS Commands
Command
Mode
Global configuration mode
Usage Guide
If a RADIUS security server meets the timeout period and successive timeout times at the same
time, the device considers the RADIUS security server to be unreachable. You can use this
command to adjust the parameters of the timeout period and successive timeout times.
Configuration
Examples
The following example sets the timeout period to 120s and the successive timeout times to 20.
Ruijie(config)# radius-server dead-criteria time 120 tries 20
Command Description
radius-server host
Defines the host of the RADIUS security server.
radius-server deadtime
Defines the duration when a device stops sending any
requests to an unreachable RADIUS security server.
Related
commands
radius-server timeout
Defines the timeout period of RADIUS packet
retransmission.
Platform
Description
N/A
radius-server deadtime
Use this command to configure the duration when a device stops sending any requests to an
unreachable RADIUS security server in global configuration mode.
Use the no form of this command to return to the default value.
radius-server deadtime minnutes
no radius-server deadtime
Parameter Description Parameter
Description
minutes
Defines the duration (in minutes) when a device stops sending any
requests to the unreachable RADIUS security server. The value
ranges from 1 minute to 1440 minute (24 hours).
Defaults
The default value of the minutes parameter is 0 minutes. That is, a device keeps sending requests
to the unreachable RADIUS security server.
Command
Mode
Global configuration mode
Usage Guide
If active RADIUS server detection is enabled on a device, the minutes parameter of this command
does not take effect on the RADIUS server. Otherwise, the RADIUS server becomes reachable
when the duration set by this command is shorter than the unreachable time.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English