Ruijie RG-WLAN Series Rgos Command Reference

Command Reference NFPP Commands
Configuration
Examples
Ruijie(config)# interface G 0/1
Ruijie(config-if)# nfpp arp-guard policy per-src-ip 2 10
Ruijie(config-if)# nfpp arp-guard policy per-src-mac 3 10
Ruijie(config-if)# nfpp arp-guard policy per-port 50 100
Related
Commands
Command Description
arp-guard attack-threshold
Set the global attack threshold.
arp-guard rate-limit
Set the global rate-limit threshold.
show nfpp arp-guard summary
Show the configurations.
show nfpp arp-guard hosts
Show the monitored host.
clear nfpp arp-guard hosts
Clear the isolated host.
Platform
Description
N/A
nfpp arp-guard scan-threshold
Use this command to set the scan threshold.
nfpp arp-guard scan-threshold pkt-cnt
Parameter
Description
Parameter Description
pkt-cnt
Set the scan threshold with the valid range of [1, 9999].
Defaults
By default, the sport-based scan threshold is not configured.
Command
Mode
Interface configuration mode.
Usage Guide
N/A
Configuration
Examples
Ruijie(config)# interface G 0/1
Ruijie(config-if)# nfpp arp-guard scan-threshold 20
Related
Commands
Command Description
arp-guard attack-threshold
Set the global attack threshold.
show nfpp arp-guard summary
Show the configurations.
show nfpp arp-guard scan
Show the ARP scan table.
clear nfpp arp-guard scan
Clear the ARP scan table.
Platform
N/A

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English