Ruijie RG-WLAN Series Rgos Command Reference

Command Reference NFPP Commands
- No configuration.
Related
Commands
Command Description
dhcp-guard attack-threshold
Set the global attack threshold.
dhcp-guard enable
Enable the DHCP anti-attack function.
dhcp-guard isolate-period
Set the global isolate time.
dhcp-guard monitor-period
Set the monitor period.
dhcp-guard monitored-host-limit
Set the maximum number of the monitored hosts.
dhcp-guard rate-limit
Set the global rate-limit threshold.
nfpp dhcp-guard enable
Enable the DHCP anti-attack function on the
interface.
nfpp dhcp-guard isolate-period
Set the isolate time.
nfpp dhcp-guard policy
Set the rate-limit threshold and attack threshold.
Platform
Description
N/A
show nfpp dhcpv6-guard hosts
Use this command to show the monitored host.
show nfpp dhcpv6-guard hosts [ statistics | [ [ vlan vid ] [ interface interface-id ] [ ip-address |
mac-address ] ] ]
Parameter
Description
Parameter Description
statistics
Show the statistical information of the monitored host.
vid
The VLAN ID.
interface-id
The interface name.
ip-address
The IP address.
mac-address
The MAC address.
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
The following example shows the statistical information of the monitored host:
Ruijie# show nfpp dhcpv6-guard hosts statistics
success fail total
------- ---- -----

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English