Ruijie RG-WLAN Series

Command Reference WIDS Commands
Command
mode
Ap-config mode for fit APs and WIDS configuration mode for fat APs
Usage Guide
Use this command on ACs and fat APs.
Configuration
Examples
#Configure attack detection in which the threshold for determining an authentication packet attack
within 10 seconds for the same MAC addresses is 200.
Ruijie-AC(config)# ap-config ap-name
Ruijie-AC(config-ap)# sigmac {auth | deauth | assoc | disassoc} number 200
time 10
Ruijie-AP(config)# wids
Ruijie-AP(config-wids) sigmac {auth | deauth | assoc | disassoc} number 200
time 10
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
static-blacklist mac-address
Use this command to configure the static blacklist. Use the no form of this command to delete the
static blacklist
static-blacklist mac-address H.H.H
no static-blacklist mac-address H.H.H
Parameter
Description
Parameter Description
H.H.H
The parameter indicates that you set the device with the source MAC
address H.H.H as a static blacklist entry.
no
The parameter indicates that you delete the static blacklist.
Defaults
No setting by default..
Command
mode
WIDS configuration mode.
Usage Guide
N/A
Configuration
Examples
#Configure the device with the source MAC address 0000.0000.0001 to the static blacklist.
Ruijie(config)# wids