Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Smart Antenna Commands
Smart Antenna Commands
smart antenna enable
Use this command to enable the Smart antenna (SA) function of the specified radio on the specified
AP. Use the no form of this command to disable the SA function.
smart antenna enable radio radio-id
no smart antenna enable radio radio-id
Parameter
Description
Parameter Description
radio-id
Configures the ID for a radio.
Defaults
The SA function is enabled by default.
Command
Mode
AP configuration mode.
Usage Guide
N/A
Configuration
Examples
#Enable the SA function of Radio 1 on a specified AP.
Ruijie(config-ap)# smart antenna enable radio 1
#Disable the SA function of Radio 1 on a specified AP.
Ruijie(config-ap)# no smart antenna enable radio 1
Related
Commands
Command Description
N/A N/A
Platform
Description
This command is supported only on wireless AC/AP series products.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English