Ruijie RG-WLAN Series Rgos Command Reference

Command Reference IP Address Commands
Commands
N/A N/A
Platform
Description
This command is supported on Layer 3 switches.
arp gratuitous-send interval
Use this command to set the interval of sending free ARP request messages on an interface. Use the
no form of this command to disable this function on the interface.
arp gratuitous-send interval seconds
no arp gratuitous-send
Parameter
Description
Parameter Description
seconds
The time interval in seconds for sending free ARP request messages
in the range from 1 to 3600
Defaults
Periodically sending free ARP request messages is disabled on an interface.
Command
Mode
Interface configuration mode
Usage Guide
If a network interface of the switch is used as the gateway of its downlink devices but a downlink
device pretends to be the gateway, you can configure the function to send free ARP request
messages regularly on this interface to notify that the switch is the real gateway.
Configuration
Examples
The following example sets the interval for sending free ARP request messages to SVI 1 to 1 second.
Ruijie(config)# interface vlan 1
Ruijie(config-if)# arp gratuitous-send interval 1
The following example disables the function of sending free ARP request messages to SVI 1.
Ruijie(config)# interface vlan 1
Ruijie(config-if)# no arp gratuitous-send
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English