Ruijie RG-WLAN Series Rgos Command Reference

Command Reference SNMP Commands
Defaults
1472 bytes.
Command
mode
Global configuration mode
Usage Guide
None
Configuration
Examples
The following example specifies the maximum SNMP packet size as 1,492 bytes:
Ruijie(config)# snmp-server packetsize 1492
Related
Commands
Command Description
snmp-server queue-length
Specifies the length of the SNMP trap message
queue.
Platform
Description
N/A
server queue-length
Use this command to specify the length of the SNMP trap message queue in global configuration
mode.
snmp-server queue-length length
Parameter
Description
Parameter Description
length
Queue length in the range from 1 to 1000
Defaults
10.
Command
mode
Global configuration mode
Usage Guide
The SNMP trap message queue is used to store the SNMP trap messages. This command can be
used to adjust the size of the SNMP trap message queue to control the speed to sending the SNMP
trap messages.
The maximum speed to send messages is 4 messages per second.
Configuration
Examples
The following example specifies the speed to send the trap message as 4 messages per second:
Ruijie(config)# snmp-server queue-length 4
Related
Commands
Command Description
snmp-server packetsize
Specifies the maximum size of the SNMP

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English