Ruijie RG-WLAN Series Rgos Command Reference

Command Reference NFPP Commands
Configuration
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# arp-guard isolate-period 180
Related
Commands
Command Description
nfpp arp-guard isolate-period
Set the isolate time on the interface.
show nfpp arp-guard summary
Show the configurations.
Platform
Description
N/A
arp-guard monitored-host-limit
Use this command to set the maximum monitored host number.
arp-guard monitored-host-limit number
Parameter
Description
Parameter Description
number
The maximum monitored host number. The valid range is 1 to
4294967295.
Defaults
1000
Command
Mode
NFPP configuration mode
Usage Guide
If the monitored host number has reached the default 1000, the administrator shall set the
max-number smaller than 1000 and it will prompt the message that %ERROR: The value that you
configured is smaller than current monitored hosts 1000, please clear a part of monitored hosts. to
remind the administrator of the invalid configuration and removing the monitored hosts.
When the maximum monitored host number has been exceeded, it prompts the message that %
NFPP_ARP_GUARD-4-SESSION_LIMIT: Attempt to exceed limit of 1000 monitored hosts.to remind
the administrator.
Configuration
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# arp-guard monitored-host-limit 200
Related
Commands
Command Description
show nfpp arp-guard summary
Show the configurations.
Platform
Description
N/A

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English