Ruijie RG-WLAN Series

Command Reference NFPP Commands
Usage Guide
N/A
Configuration
Examples
The following example shows the statistical information of the monitored host:
Ruijie# show nfpp icmp-guard hosts statistics
success fail total
------- ---- -----
100 20 120
The following example shows the monitored host:
Ruijie# show nfpp icmp-guard hosts
If column 1 shows '*', it means "hardware failed to isolate host".
VLAN interface IP address remain-time(s)
---- -------- --------- -------------
1 Gi0/1 1.1.1.1 110
2 Gi0/2 1.1.2.1 61
Total:2 host(s)
Related
Commands
Command Description
clear nfpp icmp-guard hosts
Clear the monitored host.
Platform
Description
N/A
show nfpp icmp-guard summary
Use this command to show the configurations.
show nfpp icmp-guard summary
Parameter
Description
Parameter Description
N/A N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
Ruijie# show nfpp icmp-guard summary
(Format of column Rate-limit and Attack-threshold is
per-src-ip/per-src-mac/per-port.)