Ruijie RG-WLAN Series Rgos Command Reference

Command Reference 802.1X Commands
dot1x auto-req user-detect
no dot1x auto-req user-detect
Parameter
Description
Parameter Description
N/A N/A
Defaults
Enabled
Command
Mode
Global configuration mode.
Usage Guide
Use the show dot1x auto-req command to view the setting of this function.
Configuration
Examples
The following example sets the device to stop sending authentication request messages after the
user gets on line:
Ruijie# configure terminal
Ruijie(config)# dot1x auto-req user-detect
Ruijie(config)# end
Ruijie# show dot1x auto-req
Auto-Req: Enabled
User-Detect : Enabled
Packet-Num : 0
Req-Interval: 60 Second
Related
Commands
Command Description
show dot1x auto-req Shows the authentication request information.
Platform
Description
N/A
dot1x timeout quiet-period
Use this command to set the time (in seconds) for the device to wait before reauthentication after the
authentication failure (for example, incorrect authentication password). Use the no form of the
command to restore it tothe default setting.
dot1x timeout quiet-period seconds
no dot1x timeout quiet-period
Parameter
Description
Parameter Description
seconds Time (in seconds) for the device to wait before reauthentication after

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English