Command Reference Web Authentication Commands
Description
list-name
This parameter indicates the network-related AAA accounting method
list. Please refer to the section of AAA for specific description.
Defaults
By default, the global accounting method list is named "default" and it is used by the WLAN.
Command
mode
Global configuration mode and WLAN security configuration mode.
Usage Guide
You can specify different accounting methods for different WLANs.
While configuring and using the specified accounting method list, make sure the
corresponding AAA accounting method list has been configured, or else the global
accounting method list for the corresponding type will be used.
Configuration
Examples
#Configure a network-related AAA accounting method list named "comm_acct", use the default
RADIUS server group named "radius" and apply it to the accounting method list for Ruijie
second-generation web authentication based on WLAN 100.
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# aaa accounting network comm_acct start-stop group radius
Ruijie(config)# wlansec 100
Ruijie(wlansec)# web-auth accounting v2 comm_acct
Ruijie(wlansec)# exit
Related
Commands
Command Description
aaa accounting network
Configures the network-related AAA accounting
method list.
Platform
Description
This command is supported only on wireless products.
web-auth acct-update-interval
Use this command to configure the default accounting update interval for web authentication. Use the
no form of this command to restore the default settings.
web-auth acct-update-interval minutes
no web-auth acct-update-interval
To Next Page
Loading...
Need help?
General
