Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Web Authentication Commands
Defaults
N/A
Command
mode
Global configuration mode
Usage Guide
Use this command to specify a terminal type as a mobile terminal.
The feature string of the terminal type in UA requests is configured in string. The field name is used to
identify a self-defined terminal. Different self-defined terminals cannot share the same name.
Configuration
Examples
#Add an ipod terminal with “ipod” as its feature string.
Ruijie(config)# iportal user-agent ipod type mobile ipod
Related
Commands
Command Description
show running-config
Shows the system configuration.
Platform
Description
N/A
iportal retransmit
Use this command to set the message retransmission count for the built-in Portal server.
iportal retransmit times
no iportal retransmit
Parameter
Description
Parameter Description
times
Sets the page retransmission count for the built-in Portal server,
which ranges from 1 to 13.
Defaults
By default, the count is 3.
Command
mode
Global configuration mode
Usage Guide
The configuration of this command depends on network environment. It is not recommended to
modify this parameter except that it is in special environment.
Excessive messages retransmissions may cause low message processing efficiency, while few
messages retransmissions may cause message transmission failure in bad network environment.
Configuration
Examples
#Set the count of time-out retransmission to 4.
Ruijie(config)# iportal retransmit 4
Related
Command Description

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English